Conference noted::wireless_lans

    Hi Youda,
    
    I will answer your questions below!
    
Hi there ,

I have two ( 2 ) questions that needs to be clarify :

1. Are there any instructions to install the BETA ver 5 for FH/PC under WIN 95
for NOVELL/NETWARE environment only ??

No Ip traffic, just IPX/SPX clients to communicate with Netware Servers. We
have setup the AP as a Workgroup Bridge with all defaults values ( V2.1 ) .
The
client is setup under WIN 95 with IPX/SPX as provided by WIN 95, with IP
address etc. When we try the Network Neighborhood, it tells us that this is
not
Accessible ( like we have not logged into the network ). We can ping the AP 
from the Wired side , but not from the Laptop ( NEC Versa 2400 note-book ).
RL2setup works OK and Sync with the Master AP ( one only ). 
Are we missing any thing ?? Is there a manual that explain the setup
procedures
??
    
>> It is no different setting this up for Wireless, therefor we have not
    documented any procedure of this type.  Do you have the network setup
    for Netware Client?
    
2. One of our customers , QLD XRAY are very interested in implementing wireless
in a very intense Radiology environment, with equipment such as CAT Scanners,
Nuclear Devices etc.
Do we know of any issues as far as interference in these environments ??
    
>>> I have not heard of any problems nor do I believe this will be a
    problem.  What we recommend doing, is if the customer has a particular
    area of concern, they should run a test before installing it.
    
    
Many Thanks in Advance.

Youda Kopel ,

NPB MELB.
    
    >>> Regards,
        Jeff

Hi Jeff ,

Always helpfull ,

Many Thanks ,

Youda Kopel ,
NPB Melb.

[Posted by WWW Notes gateway]