| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
I have a specialist at a site that installed MCC EMS, which included
NMCC DECnet MONITOR V2.2. When he bring it into FILEVIEW the following
error message is generated:
GKS-E-ERROR_23
Specified worstation type does not exist in routine GKS$OPEN_S
PAS-F-SUBSTRSEL ERROR
We believe that there should be some type of logical such as
GSK$WSTYPE needed with the process, but we are not sure how to do it.
Has anyone seen this problem before and know step-by-step what needs
to be done? Any help would be appreciated...
Thanks,
RO
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 192.1 | GKS$WSTYPE does need to be defined | TOOK::W_MCGRATH | DTN 226-5075 | Thu Jul 19 1990 15:10 | 11 |
I haven't seen this exact error, but you are correct. GKS$WSTYPE needs
to be defined. It should be defined as a VT240 or VT340. I think
a simple: $DEFINE GKS$WSTYPE "12" should do the trick.
I believe this is listed in the release notes, either for NMCC/DECnet
Monitor or MCC EMS.
Let me know if this doesn't do the trick.
-Will-
DTN 226-5075
| |||||
| 192.2 | The DEFINE worked | CSC32::ORTIZ | Fri Jul 20 1990 11:04 | 6 | |
Thanks for the information. The DEFINE didn't work right off. The
specialist stated that he didn't follow the exact steps to the
installation. I had him reinstall NMCC and then the DEFINE worked
fine. Thanks for the help...
RO
| |||||