[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:DECmcc user notes file. Does not replace IPMT.
Notice:Use IPMT for problems. Newsletter location in note 6187
Moderator:TAEC::BEROUD
Created:Mon Aug 21 1989
Last Modified:Wed Jun 04 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:6497
Total number of notes:27359

2379.0. "Sho statistic --> Invalid handle parameter" by ZUR01::SCHNEIDERR () Thu Feb 20 1992 10:01

Hello,

If this question is already posted, could you point me to the notes entry?

I tried to do a SHO NODE4 ... STATISTIC from historical recorded datas, via the
Iconic map PM and I click "stop operation" instead of "next". Now I get the 
message "software error, invalid handle parameter".

Hey friends out in the DECmcc world, ---- whats that---?


Roland
T.RTitleUserPersonal
Name		DateLines
2379.1BSYBEE::EGOLFJohn C. Egolf LKG2-2/T02 x226-7874Thu Feb 20 1992 10:219
	Roland,

re:
>>Now I get the message "software error, invalid handle parameter".
>>Hey friends out in the DECmcc world, ---- whats that---?

	we, here in DECmcc engineering call that a "bug".

	Thanks for finding and reporting it.
2379.2VERNA::V_GILBERTThu Feb 20 1992 12:0714
Roland,


What version of DECmcc are you using?

Which platform are you running on?

Exactly what command are you executing?

Do you get the same result with the FCL if you stop mid-stream
while doing the command?

Thanx,
Verna
2379.3more infoZUR01::SCHNEIDERRMon Feb 24 1992 03:019
Verna,

We run VMS 5.4-2 and DECmcc V1.1 with all patches installed. I saw it on Motiv
and on DECwindows. HW is a VAXstation 3100/76 with 32 MB memory. 

I've tried it only with the iconic PM and not with the FCL PM. 


Roland
2379.4QAR 2385TOOK::MINTZErik Mintz, DECmcc Development, dtn 226-5033Wed Feb 26 1992 13:062
QAR 2385
2379.5ThanksZUR01::SCHNEIDERRThu Feb 27 1992 06:473
Erik,  thanks for your info

Roland
2379.6Need more info!!BARREL::LEMMONThu Mar 19 1992 11:236
    re:.0
    
    Please try reproducing this using the command line. 
    
    Thanks
    /Jim
2379.7An other BUG?ZUR01::SCHNEIDERRWed Apr 01 1992 07:2558
In the Performance Analyzer Manual is written on page 2-7 what partitions you 
should record for the statistical reports from recorded datas.

We do a record for node4, node4 line, node4 circuit on partition * (all).

I do the following commands and get the following messages:

MCC> show node4 zhss05 circ isa-0 all statistics, for start=(31-mar-1992-18:00)-
_MCC> every=1:00 duration=1:00 until=01-apr-1992-06:00

Node4 zhss05 Circuit isa-0
AT  1-APR-1992 13:08:07 Statistics

Cannot read attributes.
                              MCC Error = 0, T1.0.0,
                                          %MCC-S-COMMON_EXCEPTIO, success with
                                          common exception reply,
                                          Requested data not available for
                                          specified time
                                          Show,
                                          Node4 zhss05 Circuit isa-0 ,
                                          Show,
                                          Node4 zhss05 Circuit isa-0 ,

MCC> show node4 zhss05 line isa-0 all statistics, for start=(31-mar-1992-18:00)-
_MCC> every=1:00 duration=1:00 until=01-apr-1992-06:00

Node4 zhss05 Line isa-0
AT  1-APR-1992 13:07:11 Statistics

Cannot read attributes.
                              MCC Error = 0, T1.0.0,
                                          %MCC-S-COMMON_EXCEPTIO, success with
                                          common exception reply,
                                          Show,
                                          Node4 zhss05 Circuit isa-0 ,
                                          Show,
                                          Node4 zhss05 Circuit isa-0 ,
                                          Requested data not available for
                                          specified time


MCC> show node4 zhss05 all statistics, for start=(31-mar-1992-18:00)-
_MCC> every=12:00 duration=12:00 until=01-apr-1992-06:00
 
Node4 zhss05
AT 30-MAR-1992 18:00:00 Statistics

No counters in the counters attribute partition for this entity.





Whit the IMAM this commands are working. By the way the example command in the
performance manual on page 2-7 doesn't work. There is a bracket to much.

Roland
2379.8QAR 2385 - answerTOOK::MINTZErik Mintz, dtn 226-5033Mon Jun 08 1992 14:3410
Qar 02385

A lot of work has been done on the alert and handle management of DECmcc
recently.  This system wide effort has been addres primarily at these
invalid handle errors on cancel.

While we cannot definitively conclude that the alert problem is 100% gone,
we are no longer able to reproduce this particular problem, and it was attacked
specifically.