[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

605.0. "DH900 MAM Self Test Codes" by QUIVER::SLAWRENCE () Tue Jan 11 1994 17:11

The following are the error codes which are displayed on the DEChub 900
Management agents LCD during selftest.

Test ID			Description

   0101			CPU Test
   0102			Diagnostic Code (EPROM) CRC Test
   0103			M68332 Internal Memory Test
   0104			Memory Data Bus Test
   0105			Memory Address Bus Test
   0106			Protected Memory Test
   0107			Refresh Timer Test
   0108			Main Firmware (FLASH) CRC Test

   0201			Non-Volatile Memory (EEPROM) Test 	(MFG only)
   0202			Main Memory Quick Verify Test
   0203			Main Memory Extended Test  	  	(MFG only)

   0301			Bus Error timer
   0302			Stuck Interrupt
   0303			RTOS Event Interrupt
   0304			RTOS General Timer Interrupt
   0305			2681A DUART Interrupt
   0306			Software Watchdog Timer Interrupt
   0307			Interrupt Priority

   0401			M68332 Chip Select Mapping
   0402			PMCA Test
   0403			2681A DUART Test
   0404                 2681A External Loopback Test		(MFG only)
   0405			Console Port Test	
   0406			Token Ring Relay selftest  		(MFG only)
   0407			Secretariat Backplane Test 		(MFG only)
   0408			Matrix Backplane Test      		(MFG only)
   0409			Power supply bus Test			(MFG only)
   040A                 Temperature Monitor Test
    
    Any that fail in the field would be cause for swapping the MAM, I
    think.
T.RTitleUserPersonal
Name		DateLines