| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Has anyone had problems loading Clearvisn onto a DECpc 433W which is
running Windows95 ?
I have formatted my disks TWICE and reloaded '95 four times and
Clearvisn untold times with the same result whereby if I start the
Router Manager application up it brings up the Stonybrook icon and
drops out.
I have loaded this product many times on many different platforms but
this is the first time this has happened with no obvious way around it.
A few times it seems to have something to do with the ODBC driver but
most times this installs fine.
Any ideas ?
Thanks in advance
John Moretti
Brisbane
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3772.1 | Fixed | GIDDAY::MORETTI | Death is just a formality | Mon Aug 05 1996 23:24 | 22 |
I finally found the error of my ways !!!
Just in case anyone else has this problem I had better let you know
what I did.
I had 2 drives C and D with windows95 installed on the D drive and WFW
installed on the C drive.
It seems that when Clearvisn updated the autoexec.bat and config.sys
files it was creating these in the D:\WINDOWS directory but the files
that needed updating were the ones in the C:\ directory.
After I copied these files to the C:\ directory from the D:\WINDOWS
directory all came good.
Just another gotcha ...... need to pay attention more often tot the
screens.
Cheers
John
| |||||