[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

4348.0. "A note on VN connectivity" by PTOJJD::DANZAK (Pittsburgher �) Sat Apr 12 1997 15:19

           <<< IROCZ::USER4:[NOTES$LIBRARY]COMMON_BROUTERS.NOTE;1 >>>
                        -< Digital Brouters Conference >-
================================================================================
Note 852.0          RESET to factory helps VNbus connectivity         No replies
PTOJJD::DANZAK "Pittsburgher �"                      15 lines  12-APR-1997 15:18
--------------------------------------------------------------------------------
    If you upgrade from VN firmware 1.(mumble) to 1.5(mumble) or later
    you may need to do a "RESET TO FACTORY" defaults to get 'em to
    talk on the backplane VNbus.  The hub will show that they are connected
    but they are not - their connection LED on the front blinks.
    
    I think that it had something to do with earlier units having the
    VNBUS disabled in the VN CLI.
    
    SO...if you have  a VN module that you've upgraded that doesn't want
    to talk on a VNbus...try a good olde RESET TA FACTORY and it may 
    fix it.
    
    (Wouldn't it be nice if it didn't show the VNbus ligo when it
    was disabled...! )
T.RTitleUserPersonal
Name		DateLines